Young Shin ZENITH – Model 210S Plus
The Young Shin ZENITH 210S Plus high-speed flatbed die cutter is designed to accommodate a wide range of applications. The ZENITH 210S Plus runs:
- Single and double wall board corrugated
- Solid substrates such as micro flute
- Litho label and single-face laminated board
- Foam core
- Plastic corrugated and paperboard down to .060 point
- Automatic grip of up to a maximum sheet thickness of .433”
- 5,000 sheets per hour
- Maximum sheet size of 82.50” x 59.05”
Integrated within the ZENITH 210S Plus die cutter are the following features:
- Scissors lift in feed area is included
- Triple action stripping – male, female and pin stripping capabilities
- Feeder lead edge hold down to assist in feeding warped board
- Bobst-compatible cutting dies
- Globally-sourced electronic components including Becker pumps, Siemens and Omron electronics utilizing standard U.S. 480V.
- Cutting plate air float removal device (Standard on 210S Plus and 250 models)
| Specification | Zenith 210S Plus |
| Maximum Sheet Size | 82.67” x 59.05” |
| Minimum Sheet Size | 31.50” x 23.62” |
| Maximum Cutting Size | 82.67” x 58.46” |
| Inside Chase | 85.04” x 60.28” |
| Minimum Gripper Margin | 0.59” |
| Cutting Pressure | 551 US tons |
| Sheet Thickness | Corrugated Board (E, B, A, AB Flute) :0.05” ~ 0.43” |
| Maximum Speed | 5000 sph |
| Total Weight | 58 US tons |
 |
FEEDING SECTIONPrecise feeding of board by reciprocating vacuum chest. Automatic setting of side joggers and back stop on touch screen. |
 |
DIECUTTING SECTIONQuick change cutting dies. Knuckle system for maximum cutting pressure. Center line system for quick order change. Die compatibility with Swiss-made die cutters. |
 |
TOUCH SCREENClear and simple readings ensure quick problem resolution. Operator-friendly controls allow easy adjustments. Machine position read out. |
 |
STRIPPING SECTIONCenter line system for quick set ups. Triple action stripping (upper, middle and bottom stripping). Innovative upper stripping frame for quick order change. |
 |
DELIVERY SECTIONAutomatic counter ensures accurate batch count and delivery. Non-stop delivery via blue top plastic belting. Side and rear guides for perfect stacking. Automatic setting of side joggers on touch screen. |
 |
GRIPPER EDGE REMOVAL DEVICEFull stripping achieved with gripper edge removal device. Discharging gripper edge by auto conveyor. |
 |
PRE MAKE-READY TABLEPre make-ready table for chase is standard and is included with the Zenith 210S. |
 |
OPTIONA semi-automatic profeeder is available. |
