Newsletters

Young Shin Revotec – Foil Stamping and Embossing 1040FS2023-09-30T00:09:13+09:00

Young Shin Revotec – Foil Stamping and Embossing 1040FS

The Young Shin REVOTEC 1040FS is a hot foil stamping machine. The innovative technology of the 1040FS sets this unit apart from its competitors. The REVOTEC 1040FS only requires a foil path of 6’ as compared to 40’ on other brands. The foil also travels with the sheet in the same direction eliminating the excessive leader often required by other competitors while shortening the foil’s transport and path through the stamper. The REVOTEC 1040FS features the many advantages offered in the highly-acclaimed REVOTEC series including:

  • An economical investment with initial and operational cost savings
  • UL-certified electronics including UL-wiring
  • Offers a 20% greater weight advantage when compared to other rival models
  • A 25% greater impressional tonnage capacity
Download PDF Floor Plan

.

REVOTEC 1040FS Series

Maximum Sheet Size 40.94” x 29.13”
Minimum Sheet Size 17.32” x 13.38”
Maximum Cutting Size 40.94” x 28.74”
Inside Chase 43.33” x 30.07”
Cutting Pressure 331 US Tons
Maximum Cutting Speed 6600 sph
Maximum Stamping Speed 5000 sph
Sheet Thickness Carton Board: 0.004” ~ 0.060”

Corrugated Board: (B Flute) : 0.157”)

Weight 22 US Tons

Foil Stamping

Maximum Foil Dimension Ø 7.87”
Foil Width 1.18” ~ 40.15”
Foil Puller Sheet – Longitude

Foil Puller Sheet – Latitude

3 Shafts

2 Shafts

Rewinding Shaft – Longitude

Rewinding Shaft – Latitude

6 Shafts

2 Shafts

Heating Zone 12 Zones
Temperature Control Range 392° F
Rewinding Box 6 Shafts
AIR BLOWER

AIR BLOWER

Sheet and foil can be separated with the unit’s integrated air blower – both longitude and latitude.

FEEDER

FEEDER

Thin sheets and corrugated boards can be smoothly fed into the 1040FS via its suction device.

MAIN TOUCH SCREEN

MAIN TOUCH SCREEN

Clear and simple readings ensure quick settings and adjustments to the foil.

FOIL DRIVING (LONGITUDE)

FOIL DRIVING (LONGITUDE)

Foil transferring is achieved via the unit’s internal Servo motors.

REWINDING BOX (LONGITUDE)

REWINDING BOX (LONGITUDE)

Rewinding is accomplished using the air shaft. This one-touch system is used to set the paper tube onto the shaft (waste foil disposal).

SUB TOUCH SCREEN

SUB TOUCH SCREEN

This allows the operator to check the machine’s condition and settings for foil adjustments.

UNWINDING DEVICE (LONGITUDE)

UNWINDING DEVICE (LONGITUDE)

This maintains foil tension utilizing the vacuum and friction.

REWINDING DEVICE (LATITUDE)

REWINDING DEVICE (LATITUDE)

Maintains foil tension with the Servo motors and disposes of the foil waste for rewinding.

SWITCHING DEVICE

SWITCHING DEVICE

Device that automatically handles foil waste.

 DELIVERY SECTION

DELIVERY SECTION

Sheets are piled up neatly with side joggers.

Download PDF Brochure

Young Shin Revotec – Foil Stamping and Embossing 1040FS

WOULD YOU LIKE MORE INFORMATION?

Request Information
REQUEST A PROPOSAL