Young Shin GIANT – Models 190, 210 and 250

Description

The Young Shin GIANT premier flatbed diecutter series incorporates both high-quality production and the integration of a fully-configured system for maximum productivity. The GIANT’s precise center line technology provides easy and rapid set up of the die board using the unit’s center block. Thin sheets feed smoothly and effortlessly with the GIANT’s enhanced feeding and conveying systems. The innovative air floating device allows easy withdrawal of the cutting plate for optimum operator efficiency. Two cameras are incorporated into the unit. One is placed within the stripping area and one is positioned in the delivery area. A monitor is located in the feed area for operator viewing. A variety of sizes are available to suit the needs of a wide variety of production environments. Young Shin’s EZ Feeder is available as an optional component of the GIANT series further enhancing productivity and profitability.

Specifications

Download PDF Floor Plans

Giant Series

Specification	GIANT 190(S)	GIANT 210(S)	GIANT 250(S)
Maximum Sheet Size	1900 x 1300 mm	2100 x 1500 mm	2500 x 1700 mm
Minimum Sheet Size	900 X 700 mm	1100 x 850 mm	2500 x 800 mm
Maximum Cutting Size	1900 X 1324 mm	2160 x 1531 mm	2100 x 1690 mm
Minimum Gripper Margin	10 mm	10 mm	15 mm
Cutting Pressure	400 US tons	500 tons	500 tons
Sheet Thickness	Corrugated Paper (E, B, A, AB Flute) : 1.5 ~11 mm	Corrugated Paper (E, B, A, AB Flute) : 1.5 ~11 mm	Corrugated Paper (E, B, A, AB Flute) : 1.5 ~11 mm
Maximum Speed	3000 sph	3000 sph	2000 sph
Required Power	25 Kw	30 Kw	30 Kw
Total Weight	24 tons	34 tons	47 tons

EZ-FEEDER

Specification	Based Upon GIANT 210
Maximum Sheet Size	82.67” x 60.50”
Minimum Sheet Size	43.30” x 33.46”
Sheet Thickness	0.05” ~ 0.43”
Maximum Speed	Depends on Machine Speed
Electrical Power	480v, 60Hz, 3-Phase
Weight	.38 US tons
Length	30.5”
Width	51.8”
Height	49.7”

Information

	DIE CUTTING SECTION Chase turnover for easy order change. Knuckle system for maximum cutting pressure. Center line system for quick order change.
	STRIPPING SECTION Center line system maximizes quick set ups. Quick-lock device for male stripping frame. Triple action stripping (male, female and bottom).
	CHASE TURNER (OPTIONAL) Dramatically increases overall productivity and throughput. Allows the next job to be set up while the current job is running.
	GRIPPER EDGE REMOVAL DEVICE (OPTIONAL) Full stripping achieved with gripper edge removal device. Discharging gripper edge by auto conveyor.
	BATCH DELIVERY SYSTEM (OPTIONAL) Automatic counter ensures batch delivery. Non-stop delivery available via roller conveyor system. Side and back guides deliver perfect stacking.
EZ-Feeder Specifications
	SUCTION FEED Strong vacuum suckers and air separators ensure precise feeding.
	WARPED SHEET GUIDE AND FRONT LAY DEVICE Warped sheet device presses down sheet edge for even feeding into front lay assembly.
	SHEET SEPARATING BLOWERS Adjustable air pressure and position separates sheets.
	SHEET JOGGERS Air cylinder jogging units keep sheets arrayed at rear and sides for enhanced feeding.
	FEEDER VIEW Powered by chain transferring device and constant timing by clutch.
	MAN-MACHINE INTERFACE Displays status of machine at all times for quick diagnosis.
	EZ FEEDER CONTROL PANEL Controls all electrical components related to the optional EZ Feeder, if installed.
	EZ FEEDER MAIN OPERATION BOX Controls the function of the EZ Feeder’s vacuum pump and feeder head movements and engages the feed drive.